The World's Safest Electrofisher.

The LR-24 Electrofisher is a rugged 24V 400W battery powered electrofisher. It is suitable for extensive field work in any weather conditions. The LR-24 uses premium electronic components and circuity housed inside of a custom molded plastic case.

The LR-24 is the most advanced electrofisher ever produced. The user interface is designed to make the LR-24 quick and easy to use. This has allowed us to offer a number of special features not available on previous backpack electrofishers.

Features

Quick Setup

Quick Setup will select a voltage level necessary to achieve 25 watts average power output through the water between electrodes. This setup uses a default setting of a pulsed DC waveform with a frequency of 30 Hz and a 12% duty cycle (equivalent to a 4ms pulse width). All settings can be adjusted up or down from this starting point to achieve levels necessary for fish capture. This is very useful when electrofishing in a new area and you're not sure what settings to use.

Dual Output

This feature allows the operator to set up two completely independent sets of waveforms and voltages and toggle between them simply by releasing and pressing the anode pole switch in less than one second. This can be very useful if working in waters with multiple age classes, or multiple species where the optimal settings may be quite different.

Safety Features

Emergency stop switch, twin audible alarms, tilt and immersion sensors and Anode-Out-of-Water sensor, combined with the ETL safety certification make the LR-24 the safest backpack electrofisher available. With the ETL Listed Mark on the LR-24 Backpack Electrofisher, researchers can be confident that they are using the safest backpack electrofisher in the world.

Power Limit Key and Power Limit Mode

The Power Limit Key allows the user to limit the maximum average output power. It is defaulted to 400 watts, which is the maximum average power output that the LR-24 is capable of producing. It can be easily changed to a lower limit, which can be useful if a study requires staying within a certain power level. The user can decide whether the frequency or the voltage will be automatically decreased in order not to exceed the output power at that limit.

Precise control over output settings

Voltage can be adjusted in 5 volt increments, frequency in 1 Hertz increments, and duty cycle (pulse width) in 1% increments. This is very desirable given study results which indicate that fish injury rates decrease corresponding to decreases in all of these settings. Exact control of the settings allows for much greater control of the output waveforms.

Numerous waveform choices

The LR-24 can produce straight DC, pulsed DC, and Burst of Pulses (previously known as CPS waveform).

Storage locations for up to 10 user selected settings

There are 10 storage locations available to either pre-program desirable settings or to store settings currently in use. These storage locations are filled with Factory Default Stored Waveforms, but can be replaced one by one with settings the user prefers. These can be pre-programmed before going in the field or saved and stored while in the field. This can be very useful if a setting has been found to be very effective with a particular species, or it can be of use if a project supervisor wants to standardize sampling and provide settings for crews to use in the field. Factory default stored waveforms can be restored if desired.

Rugged ABS Construction

Offers tough structural support in a light-weight pack-frame and integrated control box enclosure. The removable battery cover protects all cable connections from environmental conditions and wear and tear.

Suspension System

The easy-to-fit Cordura suspension harness allows for quick adjustment, making multi-user operations fast, simple and convenient. The quick release function makes it safer to operate in rough field conditions.

Technical Specifications