Hull And Transom

Hulls are constructed of rugged aluminum that gives superior impact strength and excellent resistance to water and weather corrosion. The fabrication features all-welded seams with hard machine-rivets at all critical rib support points. Seams are double welded at the bottom-to-gunwale sections and are overlaid with a formed chine.

H-models feature a minimal 6°“V” for shallow water work, while EH-models have a modest 20°"V". All models feature superior handling abilities at high running speeds. The bow is a modified “V” design, giving good lift and wave splitting action in rough water.

All Smith-Root boats come equipped with an extra heavy-duty transom built with a double H-frame-style reinforcing. This transom is highly resistant to damage that can happen on or off the trailer.

Flotation

Full-length flotation along both sides, with ample flotation placed below the deck line. This extra flotation is provided so that a fully equipped electrofishing boat will float approximately level in the unlikely event of flooding.

GPP Electrofisher with Kohler Powered Generator

Kohler generator is custom-wound with insulated high voltage windings able to deliver maximum power into the water. Generator is cooled by water pumped in through a screened intake in the bottom of the boat hull. The water strainer screen is removable for easy cleaning. Additional heavy-duty windings provide 12 volt power for battery charging and auxiliary lighting. Engine features:

• Meets Coast Guard safety standards for electrical systems and gasoline fuel systems
• One side serviceability of fuel filter, cooling system and lubrication system
• Heat exchanger
• High water and high exhaust temperature cutouts
• Flywheel guard
• Disposable oil filter
• Oil drain valve
• Full-pressure lube
• Electronic fuel pump
• Anti-dieseling solenoid
• Solid-state ignition
• Attached overflow bottle
• Automatic choke
• Emission compliant

Generator Engine Housing

Housing is lined with heat reflective and sound deadening material. A large cooling fan circulates airflow through the housing. The top lid hinges back and a 12 volt night light is provided. When closed, the lid serves as a seat mount. The adjustable seat is swivel mounted and vinyl covered with a back-rest.

Fish Holding Tank

Constructed of rugged aluminum with all welded seams. The sides have full length stiffeners and inside corners are angled for easy fish removal. Hinged lids fold down and lay flush along sides. The lids have formed bracing for sitting or walking on. Tank lights are provided at each corner for night operations. Tank is filled by a high volume pump. Fresh water is pumped in through a screened intake on the bottom of the boat hull and is constantly circulated through the holding tank. Additional aeration is provided by a secondary pump and water circulating system with a aerating dome. This feature allows transporting fish when the boat is out of water and can be used to add extra oxygen to the tank when high fish-density occurs.

Lights

Complete system of lights for navigation and safety. Featuring:

• Halogen head lights
• Navigation lights
• Pre-aimed work lights
• Deck lights
• Stern flood lights

Steering & Control Console

GPP Electrofisher and boat operator controls are integrated into a center console. The console also contains a patch panel allowing complete selection of anode/cathode boom configurations. Console hinges forward to provide easy access to all steering controls, switches, circuit breakers, and wiring terminals for the entire electrical system. All wiring terminals are clearly labeled for easy identification and servicing. A schematic diagram is provided which shows all wiring and terminal designations for the entire boat.

Work Deck

Provides a roomy and safe working area for electrofishing. The deck is below the gunwale top to give a low center of gravity and make it easier to reach fish. The work area is large enough for several people to work comfortably. The work surface is a dri-deck mat for stable footing. A sturdy 42" railing, with integrated net holders, surrounds the work deck on three sides. Foot switches used to control electrofisher output are built into the work deck. A two-position switch is provided at the steering and control console to select single or dual operation. An additional built-in foot switch is provided for the boat operator. A receptacle is provided for additional foot switches to accommodate extra crew. A large below work deck storage compartment with locking marine doors, provides a secure dry storage area (locking doors not available on SR-14H). Wiring at the work deck is contained in safe junction areas and all high voltage to the platform is in separate conduits. Meets all OSHA suggested safety guidelines.

Cathode Array

Provides better loading in low conductivity water and a less intense field at each electrode. Array is electrically isolated from boat hull on H-models. Consult factory for options isolating array on EH-models.

Electrofisher Booms

Standard Boat Booms are mounted at each corner of the bow on clutches. These clutches allow the booms to be swung from 0˚ to 180˚ for the most effective spread for the waterway being fished. The clutches also allow horizontal slippage in the event of impact. Booms are elevated by adjustable support chains attached to the safety railing.

Electrode Arrays

All Smith-Root electrofishing boats include a pair of SAA-6 electrode arrays. These medium-duty arrays features six stainless steel dropper cables that expand from twelve inches to thirty-six inches in diameter. The droppers are submersible to three feet of water and are complete with a brass quick connect fitting and safety line. AUA-6 Adjustable Umbrella Arrays are also available as an upgrade.

On-Board Fuel Tanks

Built-in tank provides gas for both the outboard and the GPP generator. The tank is foam-lined to minimize condensation. It also has a marine water separator/filter with a replaceable cartridge and shut-off valves. Fittings at the fuel filter facilitate using standard six gallon marine gas tanks to supplement the main fuel tanks.

Battery Compartment and Charging System

Provides space for two Group-24 marine batteries. A 40 amp charging system is included which utilizes power from the GPP generator. Additional charging from the outboard motor is incorporated in the charging system. A battery isolator helps protect the system from damage. Storage space above batteries provide room for a fire extinguisher and other small items.

Automatic Bilge Pump

A console mounted switch allows manual operation of the pump. The pump is rated for an open flow of 1,500 gallons per hour.